top of page
martin-plumbing-logo-hires.png
Martin Plumbing gasfitter signing a gas safety certificate at an Auckland home

GAS CERTIFICATES AUCKLAND

Need a gas certificate for a sale, your insurer or new gas work? Licensed gasfitters who certify and inspect. Visits from $150 + GST incl. travel and the first hour. 

IMG_3702 2_edited.jpg
In New Zealand, every piece of gasfitting has to be certified once it's connected. Missing paperwork can hold up a house sale, an insurance claim or a council sign-off. Getting the right certificate at the time of the work saves chasing it later.

GRAEME MARTIN - Certifying Master Gas Fitter & Plumber

45+ years experience

Selling a house? Insurer asking for paperwork? Just had gas work done?

Gas Certificates & Safety Inspections in Auckland

Licensed gasfitter lighting a newly installed gas cooktop in an Auckland kitchen

GAS SAFETY CERTIFICATES

Issued once gasfitting is finished and connected, confirming the installation is safe to use and hasn't affected any other part of your gas system. The law requires one for all gasfitting, so every gas job we complete comes with one.

Martin Plumbing gasfitter servicing a gas appliance connection

CERTIFICATES OF COMPLIANCE

Confirms the gasfitting complies with the Gas (Safety and Measurement) Regulations 2010. It can be combined with the Gas Safety Certificate into one document, so you get one clear record of the work.

Gasfitter tightening a gas fitting to repair a leak

GAS SAFETY INSPECTIONS

Buying, selling or renting out a property with gas? We inspect the existing installation, test for leaks and check the appliances and flues, then give you a written report of what we found.

Martin Plumbing van on site for a commercial gasfitting job in Auckland

COMMERCIAL GAS COMPLIANCE

Commercial kitchens, food production sites and workshops. Certification for new work, inspections for your compliance file, and clear documentation for insurers and auditors.

SMELL GAS? DON'T WAIT.

Turn the gas off at the meter or bottle. Don't use light switches, flames or phones near the smell.

Open doors and windows, step outside, then call us on 09 570 2052. If the smell is strong or anyone feels unwell, call 111 first.

Know what you need

When Do You Need a Gas Certificate?

Gasfitter installing a continuous flow gas hot water unit at an Auckland home

You need a gas certificate whenever gasfitting is done and connected. That includes:

A new gas appliance such as a hob, heater or hot water unit.

Changes to gas pipework, including extensions and relocations.

LPG to natural gas conversions.

Outdoor BBQ points and new gas connections.

Selling, buying or renting? Ask for the certificates from past gas work. If they can't be found, a safety inspection gives you a clear picture of the installation as it stands.

Our gasfitters cover St Johns, Meadowbank, Remuera, Mission Bay, St Heliers, Glendowie, Ellerslie, Parnell, Epsom, Howick and across Auckland.

What the regulations say

Who issues it: the licensed gasfitter who did, or supervised, the work.

When: as soon as practicable after the work is connected, and no later than 20 working days.

Your copy: the gasfitter must give a copy to the client and keep their own record for at least seven years.

Not satisfied it's safe? The gasfitter must disconnect the installation rather than certify it.

You'll get your certificate with your job paperwork. Need gas work done? See our Auckland gas fitting services.

We Install and Certify the Leading Gas Brands

Rheem Hot Water Cylinder
Rianni Hot Water Cylinder
Bosh Hot Water, Heaters, Cooktops
Thermaflo Gas Hot Water
Paloma Gas Hot Water

What Does a Gas Certificate Cost?
 
No call-out fee. Visits start from $150 + GST, which covers travel and the first hour. This is a minimum visit charge, not an hourly rate. If the job takes longer, our hourly rate applies in 15-minute blocks.
 
What to expect
Every gas job needs a Gas Safety Certificate by law, so we issue one with all the gas work we do. It is a separate charge, and we confirm it before we start.
A gas safety inspection of an existing installation usually takes one to two hours: $150 to $270 + GST.
Anything we find that needs fixing is priced and explained before we start.
After-hours rates are published on our pricing page.
 
Recent Auckland job: Mount Wellington
The owners needed their gas bottles relocated. We moved them, extended the gas line, pressure-tested the installation and issued the Gas Safety Certificate the law requires.
 
Related gas services: gas leak detection, gas heater servicing, LPG to natural gas conversion and gas hob & BBQ installation. Or see all our gas fitting services in Auckland.

Outdoor gas BBQ connected to a bayonet gas point on an Auckland deck

Gas Certificate Questions We Get Asked

  • It's the official record that gasfitting has been done safely and to the regulations. In New Zealand that's a Gas Safety Certificate, often combined with a Certificate of Compliance, issued by the licensed gasfitter who did the work.

  • Yes, for any gasfitting. Once the work is connected, the gasfitter must issue a Gas Safety Certificate within 20 working days and give you a copy.

  • The Certificate of Compliance confirms the work meets the regulations. The Gas Safety Certificate confirms the finished, connected installation is safe to use. They can be issued together on one form.

  • Every gas job needs a Gas Safety Certificate by law, and the certificate is a separate charge we confirm before we start. For an inspection of an existing installation there's no call-out fee: visits start from $150 + GST, which covers travel and the first hour. This is a minimum visit charge, not an hourly rate.

  • There's no single certificate required for a sale, but buyers, lawyers and insurers often ask for certificates from past gas work. If they're missing, a gas safety inspection gives everyone a clear written record.

  • A certificate can only be issued by the gasfitter who did or supervised the work. If the original gasfitter can't be found, we can inspect and test the installation, report on its condition and fix anything that isn't right.

  • The regulations allow up to 20 working days after connection. We aim to have it with you well before then, along with your job paperwork.

  • Many insurers ask for proof that gas work was done by a licensed gasfitter, especially after a claim or a renovation. Keep your certificates somewhere safe. We keep our records for at least seven years too.

  • Yes. Calls are taken 24/7 on 09 570 2052. After-hours rates are published on our pricing page.

Martin Plumbing gasfitter connecting a gas hot water unit, with the company van behind

GET THE PAPERWORK RIGHT FIRST TIME

Missing gas certificates tend to surface the week before settlement. Book now and you'll have the right paperwork before anyone asks.

bottom of page